Wholesale Brass Slip Joint Factories Pricelist - Brass parts – GUOSHI

Short Description:

Product Detail

Product Tags

Feedback (2)

Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for Shaft Movie Cast , Cnc Lathing Parts , Hydraulic Valve , our products have good reputation from the world as its most competive price and our most advantage of after-sale service to the clients。

Wholesale Brass Slip Joint Factories Pricelist - Brass parts – GUOSHI Detail:

Brass alloy is an alloy of copper and zinc, in proportions which can be varied to achieve varying mechanical, electrical, and chemical properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure.

Brass is similar to bronze, another alloy containing copper that uses tin instead of zinc.Both bronze and brass also may include small proportions of a range of other elements including arsenic, lead, phosphorus, aluminum, manganese, and silicon. Historically, the distinction between the two alloys has been less consistent and clear,and modern practice in museums and archaeology increasingly avoids both terms for historical objects in favor of the more general “copper alloy”.

Brass has long been a popular material for decoration due to its bright, gold-like appearance; being used for drawer pulls and doorknobs. It has also been widely used to make utensils due to properties such as having a low melting point, high workability (both with hand tools and with modern turning and milling machines), durability, and electrical and thermal conductivity.

Brass alloy is still commonly used in applications where corrosion resistance and low friction are required, such as locks, hinges, gears, bearings, ammunition casings, zippers, plumbing, hose couplings, valves, and electrical plugs and sockets. It is used extensively for musical instruments such as horns and bells, and also used as a substitute of copper in making costume jewelry, fashion jewelry, and other imitation jewelry. The composition of brass, generally 66% copper and 34% zinc, makes it a favorable substitute for copper based jewelry, as it exhibits greater resistance to corrosion. Brass is often used in situations in which it is important that sparks not be struck, such as in fittings and tools used near flammable or explosive materials.

Class	Proportion by weight (%)		Notes
Class	Copper	Zinc	Notes
Alpha brasses	> 65	< 35	Alpha brasses are malleable, can be worked cold, and are used in pressing, forging, or similar applications. They contain only one phase, with face-centered cubic crystal structure. With their high proportion of copper, these brasses have a more golden hue than others. The alpha phase is a substitution solid solution of zinc in copper. It is close in properties to copper, tough, strong, and somewhat difficult to machine. Best formability is with 32% of zinc. Corrosion-resistant red brasses, with 15% of zinc or less, belong here.
Alpha-beta brasses	55–65	35–45	Also called duplex brasses, these are suited for hot working. They contain both α and β’ phases; the β’-phase is ordered body-centered cubic, with zinc atoms in the center of the cubes, and is harder and stronger than α. Alpha-beta brasses are usually worked hot. The higher proportion of zinc means these brasses are brighter than alpha brasses. At 45% of zinc the alloy has the highest strength.
Beta brasses	50–55	45–50	Beta brasses can only be worked hot, and are harder, stronger, and suitable for casting. The high zinc-low copper content means these are some of the brightest and least-golden of the common brasses.
Gamma brasses	33–39	61–67	There are also Ag-Zn and Au-Zn gamma brasses, Ag 30–50%, Au 41%.The gamma phase is a cubic-lattice intermetallic compound, Cu₅Zn₈.
White brass	< 50	> 50	These are too brittle for general use. The term may also refer to certain types of nickel silver alloys as well as Cu-Zn-Sn alloys with high proportions (typically 40%+) of tin and/or zinc, as well as predominantly zinc casting alloys with copper additives. These have virtually no yellow coloring at all, and instead have a much more silvery appearance.

CuZn36Pb3 Brass shaft parts with gearing

CuZn36Pb3 Brass
shaft parts with gearing

CuZn39Pb1 Brass machining and knurling

CuZn39Pb1 Brass
machining and knurling

CuZn39Pb2 Brass parts for valve

CuZn39Pb2 Brass
parts for valve

Hexgon brass machining parts

Hexgon brass
machining parts

CuZn39Pb3 Brass machining and milling parts

CuZn39Pb3 Brass machining
and milling parts

CuZn40 Brass turning rod parts

CuZn40 Brass
turning rod parts

CuZn40Pb2 Brass nut machining service

CuZn40Pb2 Brass nut
machining service

High precision brass parts

High precision
brass parts

Product detail pictures:

Related Product Guide:

To fulfill the customers' over-expected fulfillment , we have now our solid staff to deliver our greatest general assistance which includes internet marketing, product sales, creating, manufacturing, excellent controlling, packing, warehousing and logistics for Wholesale Brass Slip Joint Factories Pricelist - Brass parts – GUOSHI , The product will supply to all over the world, such as: Colombia, Zimbabwe, Lahore, We provide good quality but unbeatable low price and the best service. Welcome to post your samples and color ring to us .We will produce the goods according to your request. If you are interested in any products we offer, please feel free to contact us directly by mail, fax, telephone or internet. We are here to answer your questions from Monday to Saturday and looking forward to cooperating with you.

Backing Flange